Automatic Fuel Injector Tester And Cleaner

Automatic Fuel Injector & Cleaner WDF-6F

This is automatic auto fuel handling system , injector test and clean machine 

Features
● Injector fuel distribution and delivery checking; leakage hunting; injector cleaning; engine carbon deposit cleaning; 
● Automatic operation: Engine idle, middle speed, high speed working condition simulation; 
● Separated ultrasonic bath; 
● Solenoid-controlled test liquid recycle; 
● Test range: MPI, CIS (High and low resistance, voltage-controlled type and current-controlled included).

Specification

Technical Characteristics 
Appearance size: 480mm(width)´500mm(depth)´460mm(height) 
Weight: 42 kg 
Temperature Scope of Operation: -10℃~+40℃ 
Work Voltage 220 Volts AC 50 Hz. 
Test Liquid Tank Volume: 4L 
Testing Tube Volume: 120 ml 
Ultrasonic Frequency: 25 kHz 
Ultrasonic Power: 75W 
Maximum Testing Number of Cylinder: 6 
Rotation Speed: 0~9950 r/min  step 50 r/min 
Pulse Duration: 1~20 ms  step 0.1 ms 
Injection Number of Times: 0~10000  step 50 
Injection Time: 0~600sec  step 1 sec  
Oil Pressure: 0~640kpa(6.5kg/cm²)±9.8kpa(0.1kg/cm²) (adjustable)● For ultrasonic diagnostic and cleaning of injectors 
● 75 Watts /25KHz ultrasonic diagnostic and cleaning of injectors, with capacity of stainless steel tank for 1 liter (8 liters available as optional). 
● Perform diagnostic of  Flow/Equalization, leak tightness, Injection Visualization, cleaning and Reverse washing . 
● Includes cables and adaptors for connection of multi-point injectors and CIS injectors  
● Micro processed equipment, totally programmable.  
● Includes high pressure pump for test liquid with filter.  
● Includes manometer of 0 – 6.5 Bar for test pressure reading.