LEEDS AUTOMOTIVE EQUIPMENT
Bus Spray Booth with Diesel Heating System
Big Spray Booth With Diesel Heating System for bus or truck
This spray booth is medium size for bus.
With Italian diesel burner heating system. Two sets fans cabinet on left side and right side.
- Wallboard: Sandwich style EPS (epispastics polystyrene) 75mm thickness. Colorful steel skin boards 0.476mm thickness. Galvanized steel roof panel.
- Door: 4 pcs of front doors with special rigid frame. Size: 4000(w) x 4800(h). 2 pcs of emergency door.
- Air Intake System (3sets): Each set consists of 2x4kw intake fan. Total 6 units of 4kw intake fan. BELIMO 20N electric damper.
- Air Exhaust System (3sets): Each set consists of 1x5.5kw exhaust fan. Total 3 units of 5.5kw exhaust fan. Multi-layer fiberglass filter. Exhaust air from basement or two sides of wallboard.
- Heating System (3sets): Each set consists of 1 unit Italy Riello G20 diesel burner 200000Kcal/h. Total 3units of burners, 600000Kcal/h. The heat exchanger is made of 1.5mm thickness stainless steel which features more heat dissipating surface, better heat exchange and better burner efficiency.
- Lighting System: Ceiling light has 18units x 4pcs of 36w lamps. Side light has 22 units x 2pcs of 36w lamps. Total 116 pcs of 36 W lamps. Brightness >900 Lux.
- Air Purification: Dual filtering structure. The primary filter can capture granules larger than 10μm. Ceiling filter capture granules bigger than 5μm. The air cleanliness in the working environment can reaches 98%.
Inside Dimension | 12x5x4.8m |
Outside Dimension | 12.15x7x5.6m |
Entrance Door | Aluminum alloy binding framework(thickness: 1.8mm),1 set folding door size: 4000×4500(mm)(W*H) |
Personal Door | 2 set side hung door:800*2000mm(W*H) |
Wallboard | 75mm EPS(epispastics polystyrene )insulation material with S=0.526 two side steel panel |
Lighting System | Lamp boxes are 45° fixed on upper two side,with 18 groups*3pcs=54pcs 20w energy saving LED lamp,with 18 groups side light. |
Air Intake and Exhaust System | With 4pcs centrifugal air blowers,Single parameter:YDW5.6m.4kw.12500m3/h |
Cabinet Setting | Intake air from upside,downside exhaust wind. |
Air duct | Made of Galvanized plate(Thickness is 0.8mm),700*700*1000,3 pcs straight,1 pc elbow |
Heating System | Each set consists of 1 unit Italy Riello G20 diesel burner 200000Kcal/h. Total 3units of burners, 600000Kcal/h. The heat exchanger is made of 1.5mm thickness stainless steel which features more heat dissipating surface, better heat exchange and better burner efficiency. |
Filtration System | Ceiling equipped with CC-G650type high-efficiency filter,which can effectively filter the 5PM dust particles.The top filter cotton mesh is light stainless steel. |
Environmental System | Each cabinet with three layers of activated carbon, plus an Environmental protection cabinet. |
Roof | The top beam, wall and frame 40 x 80 are galvanized square pipe. 75mm EPS(epispastics polystyrene )insulation material with S=0.526mm two side steel panel |
Control System | Painting,Baking,Temperature Controller, Breakdown Indicator, Power Switch, Emergency Stop Switch, and Time Setting |
Basement | High performance antirust treatment grille galvanized on the trench, the shape of channel steel is convex, Channel steel column.and the two rows of grille made of vertical column are trench type.(the civil trench is made by the demander) |
Voltage Frequency | 380V 50HZ |
Light Intensity | >=1000luxes |
Air Flow Speed | >=0.25m/s |
Total Power | 41KW |
xxxxxx
Your cart is currently empty.