LEEDS AUTOMOTIVE EQUIPMENT
Car Body Baking Preparation Room Paint Prep Station
LEEDS AUTOMOTIVE EQUIPMENT
Preparation Room for Grinding
Prep Room Structure
Body of Preparation Room
4 Sides
Rear, Left and Right wall: EPS insulation material with two sides steel panel.
Front: PVC curtain.
Roof Panel
Made of 0.8mm thick bended galvanised plate.
Ceiling Light
24pcs LED light in 8 groups.
Ceiling Filter
stainless steel cotton shelf with high efficiency filter which is easy replace.
Air Units
Fan Cabinet Made of 50x50mm square tube, 0.8mm galvanized plate as body. Filtering Fiber glass filter Fan Centrifugal exhaust fan, 1unit, motor power: 5.5KW.
Product Parameters
External Size | 7500×3550×3180mm(L×W×H) |
Internal Size | 6300×3500×2700mm(L×W×H) |
Plenum Dimension | 6300×3450×400mm(L×W×H) |
Basement | Without Basement |
Room Body | Back side with 50mm EPS wall panels, the other 3 sides with PVC curtains |
Lighting System | Ceiling lights 8units × 4pcs=32pcs 36W, 800Lux |
Intake and Exhaust System | 5.5KW double intake centrifugal fan, air capacity:15500 m3/h. Manual damper for exhaust air |
Filtering System | Pre-filter, high efficiency filter, exhaust fiberglass filter |
Control System | Fan operation switch, lighting switch, emergency stop |
Total Power | 6.7 KW |
Generator Setting | Exhaust air from rear side |
Setting Style | Steel column supporting or suspending steel hook from roof of building |
xxxxxx
Your cart is currently empty.