Manual Fuel Injector Tester

Manual Fuel Injector & Cleaner WDF-6D

This is manual auto fuel injector tester and cleaner machine 

Features

●Injector fuel distribution and delivery checking; leakage hunting; injector cleaning; engine carbon deposit cleaning;

●Automatic operation: Engine idle, middle speed, high speed working condition simulation;

●Oil pressure automatic tracking and stabilizing;

●High quality pump: Maximum pressure value is high to 7KG/CM2;

●Separated ultrasonic bath;

●Solenoid-controlled test liquid recycle;

●Test range: MPI, CIS (High and low resistance, voltage-controlled type and current-controlled included).

Specification

Appearance size: 480mm(width)*500mm(depth)*460mm(height)

Weight: 48 kg

Temperature Scope of Operation: -10℃~+40℃

Work Voltage 220 Volts AC 50 Hz.

Test Liquid Tank Volume: 4L

Testing Tube Volume: 120 ml

Ultrasonic Frequency/Power: 25 kHz/100W

Include Oil overheat alarm and combustible gas over-limit alarm

Maximum Testing Number of Cylinder: 6

Rotation Speed: 0~9950 r/min  step 50 r/min

Pulse Duration: 1~20 ms  step 0.1 ms

Injection Number of Times/ Injection Time: 0~10000  step 50/0~600sec  step 1 sec

Include oil pressure tracking and stabilizing function

Oil Pressure: 0~735kpa(7.5kg/cm²)±9.8kpa(0.1kg/cm²) (adjustable)• For diagnostic and cleaning of injectors

100 Watts /25KHz ultrasonic diagnostic and cleaning of injectors, with capacity of stainless steel tank for 1 liter (8 liters available as optional).

Perform diagnostic of  Flow/Equalization, leak tightness, Injection Visualization, cleaning and Reverse washing .

Includes cables and adaptors for connection of multi-point injectors and CIS injectors 

Includes high pressure pump for test liquid with filter. 

Includes manometer of 0 – 10 Bar for test pressure reading.